Guide
How to use Night Shift and True Tone on a Mac
Quick answer
Open System Settings › Displays and click Night Shift…. Set Schedule to Sunset to Sunrise or Custom, or turn on Turn on until tomorrow to start it now, and drag Color temperature toward More Warm. True Tone is a switch on the same Displays page, shown only for displays that support it. Both are also in Control Center › Display.
Levers turns Night Shift and True Tone on and off with one click each, from the menu bar.
How to turn on Night Shift on a Mac
- 1
Choose Apple menu › System Settings, then click Displays in the sidebar.
- 2
Click Night Shift… at the bottom of the page.
- 3
Next to Schedule, choose Sunset to Sunrise, or Custom and set the times. Choose Off to turn it on only by hand.
- 4
To start it now, turn on Turn on until tomorrow. With the Sunset to Sunrise schedule it reads Turn on until sunrise.
- 5
Drag Color temperature toward More Warm or Less Warm, then click Done.
Sunset to Sunrise needs location for the time zone turned on, so the Mac knows when the sun sets where you are.
Night Shift moves the screen’s colors toward the warmer end of the spectrum after dark, which Apple says may help you get a better night’s sleep. True Tone is different: it uses light sensors to keep colors looking the same as the light in the room changes. Both are in Displays settings. The table shows what each does and where it works.
Night Shift and True Tone compared
| What matters | Night Shift | True Tone |
|---|---|---|
| What it changes | Warmer colors, on a schedule or by hand | Colors matched to the light around you |
| Where to set it | System Settings › Displays › Night Shift… | System Settings › Displays |
| In Control Center | Yes | Yes |
| Which Macs | Macs from 2012 on, Mac Pro from 2013 | Macs and displays with its light sensors |
| Other external displays | Depends on the display | Up to 32 inches, with conditions |
| TVs and projectors | No | No |
Yes Partly No
How to turn Night Shift on from Control Center
Click Control Center in the menu bar, click Display, and click Night Shift. Click it again to turn it off. True Tone and Dark Mode are buttons in the same place.
Turning Night Shift on or off by hand lasts until sunrise or the next time the schedule changes it. The schedule itself stays as it was.
How to turn True Tone on or off
Open System Settings › Displays, select the display at the top if you have more than one, and turn True Tone on or off. If there’s no switch, that display doesn’t support True Tone.
Turn it off when colors must stay exact, such as editing photos or recording your screen; turn it on to let the screen follow the room’s light.
Why is Night Shift missing or not working on my Mac?
Night Shift needs a Mac from 2012 or later, or a Mac Pro from 2013 or later, so the Mac itself is rarely the reason. The display usually is:
- A TV or projector. Night Shift doesn’t apply to them.
- Some external displays. How well Night Shift works on one depends on the display, and some don’t support it at all. With only those connected, the Night Shift… button doesn’t show.
- Invert colors is on. The two don’t run together: turning Night Shift on turns Invert colors off, and macOS asks first.
Why is True Tone missing on my Mac?
True Tone needs light sensors, so the switch shows only for displays that support it: the built-in screens of Macs made for it, and Apple Studio Display, Studio Display XDR and Pro Display XDR when they’re connected to a Mac that supports them.
Other external displays, up to 32 inches and not TVs or projectors, can use True Tone when connected to a Mac laptop with its lid open, or to an iMac from 2020 or later.
Some accessibility settings can turn True Tone off: Invert colors, a grayscale filter and Increase contrast.
Can I give Night Shift a keyboard shortcut?
Not in macOS itself, but the Shortcuts app has Set Night Shift and Set True Tone actions. Make a shortcut with one, set it to Toggle, and add a keyboard shortcut in its Shortcut Details, the same way as a Dark Mode shortcut.
Or switch them with one click in Levers
We make Levers.
Levers puts Night Shift and True Tone switches in your menu bar. One click turns either on or off, without opening System Settings or Control Center. Recording Mode can turn both off while you record your screen, so the colors in the recording stay true, and put them back when you stop.
- Night Shift
- True Tone
- One click each, or a hotkey of your own for either
- Turned off for screen recordings, and back on after
- Turn Off After: off again in an hour, or tomorrow morning
Good to know
- Levers turns Night Shift and True Tone on and off. The schedule and the color temperature stay in System Settings › Displays. On a Mac or display without them, the switches don’t show.
- Needs macOS 15 Sequoia or later.
- One payment, no subscription, with a 14-day refund.
Questions people ask
How do I turn on Night Shift on a Mac?
Open System Settings › Displays, click Night Shift…, and turn on Turn on until tomorrow, or set a schedule. Or click Control Center in the menu bar, click Display, and click Night Shift.
What’s the difference between Night Shift and True Tone?
Night Shift makes the colors warmer in the evening, on a schedule or by hand. True Tone adjusts the colors all day to match the light in the room, using light sensors.
Why can’t I find Night Shift on my external display?
Night Shift doesn’t apply to TVs and projectors, and on other external displays it depends on the display. If no display that’s connected supports it, the Night Shift… button doesn’t show.
Why is True Tone not showing on my Mac?
The display doesn’t have what True Tone needs, or it’s an external display connected to a laptop with its lid closed. Invert colors, a grayscale filter or Increase contrast can also turn True Tone off.
Should I turn off True Tone?
Turn it off when colors must stay exact, such as editing photos or recording your screen. Otherwise it’s fine to leave on.
Is there an app that turns Night Shift on and off with one click?
Yes. Levers puts Night Shift and True Tone switches in your menu bar, one click each, and can turn both off while you record your screen. It costs from $6.99, paid once.